Report design and manufacturing plastic injection mold

REPORT DESIGN AND MANUFACTURING PLASTIC INJECTION MOLD2 plate injection mold2 plate injection moldCONSTITUTEA cavityMany cavityHaving core inside the core graft transplantationHaving grafted coreConsists of 2 parts: mold prior (negative mold) and patterned (positive mold)Cấu tạoII. PRINCIPLE OF OPERATIONTables machine motion from left to right to bring action part moldShaft guidance and navigation for the second silver mold half and static moldThe cooling system will operateWhen the second half against the same mold, the plastic molding machine will pump into the cavity, depending on the magnitude of the plastic products will be filled within 18 to 60 secondsII. PRINCIPLE OF OPERATIONII. PRINCIPLE OF OPERATIONThe process of pushing the plate compression springs push the mold, pushing shaft of the machine will push two plates push, pulls in the system and the escapeII. PRINCIPLE OF OPERATIONThis process is performed on an ongoing basisIII. APPLICATION•These products have fewer vents. Is the civil, personal items, household utensils.Products with high accurately and high technical requirements.Based on the public to identify the mold 2 sheets?Mold Based on only 2 plates, 1 move 1 stand still, just open one time was able to get products and plastic channels (Roll longer sticky resin on the product).The layout channel (channel 1 on the same plane)• The structure of the mold• Products after withdrawing moldcharacteristics to identify a second mold plate?